Helpdesk

Page tree

University of Tartu IT wiki

In this guide, you will find instructions about using Deltaprint.

Deltaprint printer can be used by LTAT and LTMS employees

 Enne seadistamist veendu, et:

  • The initial printer software installation requires logging into the computer as an administrator
  • The operating system has been updated (in case of error messages, check for system updates);
  • The computer must be connected either to the UT network with a cable or to eduroam with WiFi;

Guides

If you have changed the password of your user account, you must log in again with a new password during the initial setup.

  1. Open the Run application using the keyboard shortcut +R (or use search). Then, enter the following adress:

    \\printserverhp.domenis.ut.ee\Deltaprint



  2. Fill in the blanks as following and click OK.

    1. Username: domenis\username
    2. Password: UT account password
      domenis\username

      NB! Be sure to select Remember my credentials, otherwise printing will not work after restarting the computer.
  3. After successful login, the printer job queue will be displayed.
    If the computer asks for permission to install additional drivers, click Yes.

If you have changed the password of your user account, the added printer should be removed from the computer and added again using the instructions above.

  1. Open the start menu (or use search) and type Credential Manager.

  2. In the windows that opens, select Windows Credentials and then click the Add a Windows credentials button.
  3. Fill in the blanks as following and click OK.
    1. Internet or network address: printserverhp.domenis.ut.ee
    2. Username: domenis\username
    3. Password: UT account password
  4. After adding the user account, open the Run application (key combination Win + R or type Run in the search), enter the following command: \\printserverhp.domenis.ut.ee\Deltaprint and press the OK button.
    \\printserverhp.domenis.ut.ee\Deltaprint

  5. After successful login, the printer job queue will be displayed.
    If the computer asks for permission to install additional drivers, click Yes.

NB! If you change the password associated with your UT user, it must be changed in the Credential Manager of this computer.

  • No labels

This page has no comments.