In this guide, you will find instructions on how to connect the cloud printer manually on MacOS and Linux devices.
HTML Wrap | ||
---|---|---|
| ||
To connect a printer on a Windows device, use the automatic setting for connecting a printer: Connecting a cloud printer from a print server.
Guides
Expand | ||
---|---|---|
| ||
|
Note |
---|
Eestikeelne versioon asub siin: Printeri seadistamine käsitsi. |
Table of Contents |
---|
|
|
|
Select "Ports" from the top and look for a ticked option in the list below where the IP-s are shown and write it down. It consists of 4 numbers which are separated by "." For example: 192.168.0.1
You have to download the printer driver from the manufacturers homepage. (If you already have the driver skip to step 5). Just "Google" the printer model name and write "driver" after that. Make sure to download drivers only from the manufacturers website. There are plenty of "middle-man" sites that may not provide trustworthy results. Note that the drivers come in very different "shapes and sizes". Some come with an .exe, some with .zip, some with the files in multiple folders and so on. For our method we need to aquire the driver in a form of simple folders and files. First of all create a new folder to desktop and move the previously downloaded driver file(s) to there.
|
Sometimes the driver comes in launcher .exe format and it asks a location to exctract files when opened. Choose the folder you created previously and click "Next". (The screen varies depending on the driver).
After that the installer may open itself (the screen varies on the driver). Just close it because we are going to use the driver files by different method.
If the drivers come in ".zip" or ".7z" or ".rar" file, just extract them into an empty folder you created before. It is usually done by right clicking on the file and choosing "7-zip" and "Extract Here" when using 7-Zip or just "Extract Here" when using WinRar.
If you have aquired the IP and the driver then you can finally start the connection process. Click on the magnifying glass in the bottom-left corner of your screen.
Type in “
Control Panel
” and open.Navigate to “Hardware and Sound.” and click on "View devices and printers".
Click on “Add a printer” from the menu.
Proceed to “The printer that I want isn’t listed.”
Choose "Add a printer using a TCP/IP address or hostname" and press "Next".
Under "Device type" choose "TCP/IP Device".
Next to “Hostname or the IP address,” type in your printers IP address. The "Port name" will fill automatically with the same information as "Hostname or the IP address". Make sure the "Query the printer and automatically select the drivers to use" is NOT ticked. After that press "Next".
Choose "Have disk"
Select "Browse" to search for the previously made folder in which the printer driver is located.
The folder layout can be quite different and often depends on the printer manufacturer (HP, Canon, Sharp etc.) It might also depend on the drivers specific version. All in all you must find a file with ".INF" written in the end of the filename. There might be different folders for 32bit and 64bit versions. Make sure to select the correct one. Most of today's computers are using the 64 bit version.
If you have located the ".INF" file, select it and press "Open".
After that the exact location of the ".INF" file will be shown on the bottom and you may now click on "OK".
If you chose the right location there should be at least one option available to choose from. If there are multiple options, choose the one which suits with your printer model and press "Next".
After that you may choose a name for your printer. It is recommended to use the printers model name when naming the printer.
Mac OS X
Expand | ||
---|---|---|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click "Add".
|
Expand | ||
---|---|---|
|
| ||
|
|
Click Add.
From the menu on the left, choose Network Printer and Windows Printer via SAMBA from the submenu.
Enter the follwing address on the smb:// field: printserver.
Set the Authentication option to
|
|
|
|
|
|
|
|
Click Forward.
Check the Duplexer option to enable two-sided printing and click Forward.
|
Give the printer a name (for example Printer) and click Apply.